wrong aircraft (Kamov Ka-32T)

[ryder]

Hello, colleagues.
I have tried different variations of the name. Adjusted it down to one pound of weight. Nothing has any effect.
Maybe someone knows on the basis of what parameters the system recognizes the compliance of the aircraft/helicopter to the declared?

[Cat]

Try changing the "ui manufacturer" name from Alpha to Kamov
also in the type line below that it is showing as a KA-27 not a KA32

Although FSA usually is pretty lenient in types as long as the zero fuel weights are close and the engine count is correct.

Also make sure the max fuel weight is no more than 3214 lbs (1458 kg)

[joefremont]

The system checks the weights and the number of engines, the weights there look ok.

[joefremont]

Take a look at your log files which you will find in your Documents/FSAirlines folder, there will be one for each day, search for "missmatch db", it should tell you what it does not like.

And for the record, the client does not care about the names.

[ryder]

Thanks so much guys for your replies.
You were right joefremont! I found the problem in the log file.
It turned out to be “Engine count missmatch db”.

[ryder]

I found not a little useful information in the log file. The scary message remains unexplained:
Warn: [CClient] Loop time: 20010ms / T1: 540263 T2: 540263 T3: 540263 T4: 540263 TA: 15.7145 TC: 2098 TR: 354

[joefremont]

I found not a little useful information in the log file. The scary message remains unexplained:
Warn: [CClient] Loop time: 20010ms / T1: 540263 T2: 540263 T3: 540263 T4: 540263 TA: 15.7145 TC: 2098 TR: 354

That is useful for me some times to tell how much times various functions are taking within the client. When ever I think I don't need them anymore a situation arises where I do.