Flight Plans Problem

Please report Bugs and Problems here

Moderator: FSAirlines Staff

Locked
mau1940

Flight Plans Problem

Post by mau1940 » Tue Jan 22, 2008 4:22 pm

Hi all, can anybody tell where I have gone wrong, I entered my flight plans, which have been ok in the past, but are now coming up with :-

Error on line 1: simrate out of range,
Error on line 2: simrate out of range,
Error on line 3: simrate out of range,
Error on line 4: simrate out of range,
Error on line 5: simrate out of range,
Error on line 6: simrate out of range,
Error on line 7: simrate out of range,
Error on line 8: simrate out of range,


This is my line 1 :-
YBA001,EGSH,EGPD,1000,1130,ATR-72,SX-LFB,2x,91v$,0,EGSH DCT SUPEL Y70 BATLI M150 GASKO P18 ADN DCT EGPD,,1-3-5-7
........................................................... ^ here was the fault
all the routes are nearly the same
the only alteration I made was putting in the flight route and changing from B190 to atr72.
and can you tell me what goes in the comas before the days
and why there is no aircraft in the client when selected.

Your help is much appreciated......


:cry: :cry:


PS found fault in flight plan, sorry...
But still no aircraft in the client

:oops: :oops:

Konny
FSAirlines Developer
Posts: 1564
Joined: Sun Sep 25, 2005 10:40 am
Location: Munich, Germany
Contact:

Post by Konny » Wed Jan 23, 2008 4:15 pm

I think the problem is between the dep-time and simrate. The ATR-72 is not the icao-code of the aircraft (should be AT72) and afterwards the ID of the aircraft type is missing. So it should look like something like this:
..,1130,AT72,13(there are different AT72s so you have to find out the id for yours),SX-LFB,2x,...

for further info please read the John's guide:
http://www.fsairlines.net/forum/viewtopic.php?t=3338
Konrad - FSAirlines Developer
Image

mau1940

Post by mau1940 » Thu Jan 24, 2008 12:26 pm

Konny wrote:I think the problem is between the dep-time and simrate. The ATR-72 is not the icao-code of the aircraft (should be AT72) and afterwards the ID of the aircraft type is missing. So it should look like something like this:
..,1130,AT72,13(there are different AT72s so you have to find out the id for yours),SX-LFB,2x,...

for further info please read the John's guide:
http://www.fsairlines.net/forum/viewtopic.php?t=3338
Thanks Konny, I have corrected the problem,with the aircaft type (which was 211) and has been accepted,

Locked