Client resetting after End Flight

[alemaobaiano]

I've just completed a flight from SBCO to SBKP and after landing I heard the "ding". I taxied in, shut down and went to the client to end the flight. As soon as I clicked on the end flight button the client shut down and reset my flight. Any ideas?

FS9.1, Windows XP Pro SP3, FSUIPC interface, tracker off, CLS A310-200F (used without problems before now). I've attached the debug.out file, which shows the flight and registers the landing, but then reports that the Exit button was pressed and the flight was aborted. And no, I didn't press the Exit button by mistake.

Thanks

[Quantum]

Hi,

Extracted from your debug file :-

30.1.2009 - 22:16:47.125 Debug: [CReport] Upload Tracker Data! (Landed)
30.1.2009 - 22:22:45.859 Debug: [CUserInterface] Button clicked: Exit (ID=0)
30.1.2009 - 22:22:45.906 Debug: [CUserInterface] Aborting flight in progress!
30.1.2009 - 22:22:45.906 Debug: [CClientInterface] Calculated code: c1f
30.1.2009 - 22:22:46.734 Debug: [CClientInterface] DATASTART
30.1.2009 - 22:22:46.734 Debug: [CClientInterface] --> SUCCESS

You hit the wrong button I'm afraid.

From the previous flight :-

9.12.2008 - 22:57:46.187 Debug: [CClientInterface] --> SUCCESS
9.12.2008 - 22:57:46.187 Debug: [CClientInterface] --> DATAEND
9.12.2008 - 22:57:46.203 Debug: [CReport] Upload Tracker Data! (Landed)
9.12.2008 - 23:7:14.343 Debug: [CUserInterface] Button clicked: End flight (ID=9)
9.12.2008 - 23:7:15.937 Debug: [CUserInterface] Button clicked: Next (ID=10)
9.12.2008 - 23:7:16.906 Debug: [CClientInterface] DATASTART

Regards

John

[alemaobaiano]

. And no, I didn't press the Exit button by mistake.

Looks like you are right John