Like most people, I typically use CTRL+E to auto start both engines and I'm on my way to flying. However, it is not very realistic.
Any one know the correct engine start procedure to start up a FSX Boeing 737? I've gotten the engines to go at 4% N1, but no further than that.
Can someone give me a highly detailed procedure on starting them properly? I'm not very good at following instructions, so the more specific, the better.
FSX Boeing 737 Engine Start Up
Moderator: FSAirlines Staff
- AdmiralRolfe
- Captain
- Posts: 296
- Joined: Fri Mar 21, 2008 1:19 am
- Location: Located near KDTW
- jonathan12341234
- Language Admin
- Posts: 204
- Joined: Thu Nov 20, 2008 8:21 pm
- Location: EKSB
- Contact:
- flightsimer
- Chief Pilot
- Posts: 1815
- Joined: Tue Oct 09, 2007 3:35 am
Re: FSX Boeing 737 Engine Start Up
well i was fooling around... but it seems all you have to do is bring up the throttle panel, and click the 2 starter buttons up (under the throttles) and they will automatically start.
Owner/CEO
North Eastern Airways
North Eastern Airways
- jonathan12341234
- Language Admin
- Posts: 204
- Joined: Thu Nov 20, 2008 8:21 pm
- Location: EKSB
- Contact:
Re: FSX Boeing 737 Engine Start Up
This is from a guide by " Werner Schott" NOT ME
This guide can be downloaded in FULL from flock-air.com
Thrust Leavers: IDLE
Engine Area: CLEAR
Engine Start Switches: GND/ING BOTH
Fuel Pump Switches: ON
Left Engine
Master Starter Switch: ON
At N2>20% Fuel Flow: CHECK ON
N1 increasing as N2 incr: CHECK
Oil Pressure: CHECK
Generator Switch: ON
Repeat for right Engine
Fuel Pump Switches: OFF
APU Gen,APU: OFF
This segement of the guide is preety much usless with out the full thing, so again Download it from Flock-air.com.
I DID NOT MAKE THIS GUIDE, THIS WAS POSTED FOR INFORMATION PURPOSES ONLY! ALL CREDITS GO TO THERE RESPECTIVE OWNERS (Werner Schott)
This guide can be downloaded in FULL from flock-air.com
Thrust Leavers: IDLE
Engine Area: CLEAR
Engine Start Switches: GND/ING BOTH
Fuel Pump Switches: ON
Left Engine
Master Starter Switch: ON
At N2>20% Fuel Flow: CHECK ON
N1 increasing as N2 incr: CHECK
Oil Pressure: CHECK
Generator Switch: ON
Repeat for right Engine
Fuel Pump Switches: OFF
APU Gen,APU: OFF
This segement of the guide is preety much usless with out the full thing, so again Download it from Flock-air.com.
I DID NOT MAKE THIS GUIDE, THIS WAS POSTED FOR INFORMATION PURPOSES ONLY! ALL CREDITS GO TO THERE RESPECTIVE OWNERS (Werner Schott)
- jonathan12341234
- Language Admin
- Posts: 204
- Joined: Thu Nov 20, 2008 8:21 pm
- Location: EKSB
- Contact:
- AdmiralRolfe
- Captain
- Posts: 296
- Joined: Fri Mar 21, 2008 1:19 am
- Location: Located near KDTW
Re: FSX Boeing 737 Engine Start Up
Linking isn't very effective when I'm on a mobile device that can't download anything except PDFs, DOCs, and email. Thanks for the guide. I managed to start the engines, but the PDF keeps on displaying a start valve open switch. Any ideas on how to fix this?